Coatings
Paints, resins, varnishes and technical coatings designed to improve appearance, adhesion, corrosion and abrasion resistance, waterproofing and long-term surface durability.
Tailoring surface properties to each requirement
The LAGUERRE Group develops and manufactures coatings designed to protect, decorate and improve surfaces exposed to mechanical stress and external factors such as ultraviolet radiation, water, oxidation, corrosion, temperature and mould.
Find the right solution
Search for a product reference, technology or application, then open the product card to view its main characteristics.
Water-based thin-film floor paints
Water-based paints and varnishes for floors, walls, mineral substrates, marking and applications requiring low odour or rapid return to service.
Two-component epoxy coating for floors and walls, forming a hard, smooth, satin-gloss film after curing.
- Car parks, warehouses, retail areas and technical rooms
- Application on concrete, mortar, stone and fibre cement
- Damp substrates without running water
- Finish for epoxy systems and mortars
Single-component paint reinforced with mineral pigments for high abrasion resistance.
- Fast drying and excellent adhesion
- Resistance to water, alkalis and saline solutions
- Good resistance to grease
- Can be recoated on the same day
Water-thinnable two-component polyurethane paint for use in one or two coats as both primer and finish.
- 5:1 mixing ratio by volume
- Interior or exterior use
- Excellent weather resistance
- One-coat or two-coat system
Water-based acrylic emulsion paint for marking grass sports grounds and other substrates.
- Resistance to weathering, rubbing and sliding
- No excessive build-up affecting the ball trajectory
- High whiteness for improved visibility
- Suitable for grass, cement and asphalt
Adhesion varnish based on pure acrylic emulsions for roadworks and substrates where adhesion is uncertain.
- Preparation of difficult substrates
- Roadworks
- Improved adhesion
Fast-drying single-component varnish providing excellent adhesion to sound substrates.
- Abrasion resistance
- Resistance to water and alkalis
- Resistance to saline solutions and grease
- Same-day recoating
Water-based two-component polyurethane varnish forming a hard, smooth, matt film.
- Protection of floors, car parks and warehouses
- Retail areas and technical rooms
- Finish for coloured-quartz systems
- Finish for self-levelling epoxy or polyurethane coatings
Solvent-based single-component thin-film floor paints
Single-component solutions for wear resistance, road marking and the protection of concrete, timber and floors exposed to regular washing or mechanical stress.
Single-component paint curing through reaction with ambient moisture and providing excellent abrasion resistance.
- New or existing floors and walls
- Resistance to wear, chemical exposure and repeated washing
- Adhesion to cement, timber and porous tiles
- Can be used as a finish over epoxy or polyurethane coatings
Road-marking paint based on plasticised acrylic and methacrylic resins.
- Centre lines and pedestrian crossings
- Elasticity and hardness
- Resistance to abrasion, weathering and yellowing
- Fast drying and good UV resistance
Varnish based on synthetic and methacrylic resins designed to improve paint adhesion.
- Adhesion primer
- Roadworks
- Preparation of difficult substrates
Varnish based on isocyanate-urethane-modified alkyds for new work and maintenance.
- Tables, furniture, timber floors and concrete
- Kitchens and bathrooms
- Fast drying and curing
- Non-yellowing, for interior and exterior use
Single-component polyurethane paint modified with isomerised rubber for medium-traffic areas.
- Warehouses, retail areas, stairs, workshops and basements
- Balconies and loggias, for new work or maintenance
- Resistance to petrol, grease, impact and abrasion
- Antistatic version available for computer rooms
Solvent-based methacrylic finishing varnish that protects concrete and gives it a glossy wet-look appearance.
- Protection against water, dust, grease and stains
- Easier maintenance
- Can be tinted with colour bases to achieve a translucent RAL finish
Solvent-based two-component thin-film floor paints
High-performance two-component systems for industrial floors, decorative surfaces, polished concrete, timber floors and environments exposed to chemicals.
High-solids, surface-tolerant two-component epoxy paint providing a decorative, wear-resistant finish.
- Factories, warehouses, garages and laboratories
- Resistance to damp conditions
- Resistance to oils, acids, alkalis, solvents and splashes
- Application on prepared concrete or previously painted surfaces
Chemically curing, fast-hardening two-component acrylic polyurethane paint.
- Excellent abrasion resistance
- Hard film with very high mechanical strength
- Good chemical resistance
- Fast drying
Varnish produced by the reaction of a hydroxylated polyester with an isocyanate, providing exceptional hardness.
- New or mechanically refurbished timber
- Resistance to scratching and rubbing
- Resistance to solvents and chemicals
- Two or three coats recommended
Two-component floor coating based on epoxy resins and a polyamide hardener.
- Exceptional adhesion
- High hardness and abrasion resistance
- Resistance to oils, grease, detergents, acids and alkalis
- Good resistance to hydrocarbons
Solvent-based two-component varnish for concrete furniture and walls, particularly in kitchens and bathrooms.
- Fast drying and curing
- Resistance to detergents and alcohols
- Non-yellowing varnish
- Finish for polished concrete
Floor resins
Self-levelling, high-build or mortar-grade epoxy and polyurethane systems for waterproofing, renovation, decorative flooring and heavy industrial service.
Solvent-free, self-levelling, semi-flexible two-component polyurethane floor coating.
- Thicknesses from 1 to 3 mm
- Flexible, smooth, semi-gloss film
- High mechanical strength
Water-dispersed two-component system for waterproofing and restoring substrates affected by moisture.
- Adhesion to concrete and masonry
- Resistance to negative water pressure
- Tanks, reservoirs, pipes and channels
- Primer for coatings that cannot be applied directly to damp substrates
Chemically curing, water-dispersed two-component epoxy composition.
- Adhesion primer for concrete
- Bonding adhesive for concrete construction joints
Solvent-free two-component epoxy coating for floors and walls, forming a hard, smooth and glossy film.
- Concrete, fibre cement and sandblasted or primed metals
- Can be reinforced with glass-fibre mats
- High chemical resistance
Solvent-free two-component epoxy system for medium-build decorative floors.
- Combined with coloured-quartz fillers
- Flowable translucent binders
- Low viscosity
Three-component solvent-free epoxy coating for floors exposed to heavy service.
- Thicknesses from 2 to 4 mm
- Industrial floors, warehouses and storage halls
- Loading docks and high-traffic areas
- Resistance to water, dilute acids and alkalis, fuels and detergents
Three-component mortar for industrial floors from 5 to 10 mm thick.
- Strong adhesion and high mechanical strength
- Good chemical resistance
- Flat seamless surfaces
- Workshops, warehouses and loading docks
Colourless, solvent-free two-component epoxy resin for decorative interior and exterior floors.
- Mixed with aggregates
- Stone-carpet system
- Interior and exterior application
Two-component adhesion primer for floors and walls, compatible with many mineral substrates.
- Concrete, cement and fibre cement
- Brick, stone and concrete block
- Outstanding adhesion
Coatings for demanding environments
The Coatings systems meet the protection, finishing, renovation and maintenance requirements of a wide range of surfaces.
Floors industriels et logistiques
Workshops, warehouses, storage halls, garages, loading docks and traffic areas.
Buildings and mineral surfaces
Concrete, mortar, stone, façades, walls, technical rooms and areas exposed to moisture.
Retail and technical spaces
Retail areas, car parks, basements and rooms requiring a hard-wearing, easy-care surface.
Road marking and sports facilities
Road markings, pedestrian crossings, centre lines, sports grounds and asphalt surfaces.
Timber, furniture and decorative concrete
Timber floors, tables, furniture, kitchens, bathrooms, polished concrete and decorative surfaces.
Substrate protection and maintenance
Water repellency, anti-moss treatment, cleaning, preparation and improved slip resistance.
Downloadable catalogues
Browse the market-specific documents to find the product ranges, applications and main technical characteristics.
Woodworking catalogue
Varnishes, finishes and solutions for timber and furniture.
Building-paints catalogue
Protection, decoration and renovation solutions for buildings.
Flooring catalogue
Paints, resins and specialist floor coatings.
Industrial-paints catalogue
Paints and protective systems for industrial environments.
Are you looking for a coating suited to a specific requirement?
Tell us about the substrate, environment, operating stresses, required result and application conditions. The LAGUERRE team will guide you towards the most appropriate system.